Auralex ELiTE Insatallation Guidelines
pArt Sicence Audio Tile Showcase 24 Piece Set
Thank you for purchasing pArtScienceT AudioTileT 24 piece set—the next generation of acoustical treatments from Auralex® Acoustics. Varying thickness built into each patent–pending AudioTile delivers excellent broadband absorption, while the tessellated forms allow a unique means of blending absorption, diffusion, and reflection for optimum acoustical performance.
AudioTile Features Include:
Maximum Broadband Absorption: Absorption coefficient of 0.81 @ 125 Hz. Maximum NRC = 1.00 to 1.05
depending on installation
Varying Thickness: Foam thickness varies from 1” to 4” to provide effective absorption at a wide range of frequencies
Unlimited Tessellation Design Patterns: Allows a unique means of blending absorption,
diffusion and reflection
Easy Installation: Mount using FoamtakT spray adhesive, Tubetak ProT liquid adhesive
and/or Temp.TabsT Studiofoam® mounting kits
This installation guide includes general recommendations and installation procedures for seven possible designs you can create from this 24 piece box of AudioTile. To see additional design ideas, visit the AudioTile design gallery at Auralex.com. Should you have any questions about the installation of your pArtScience AudioTile System, feel free to contact an Auralex Application Specialist via email at appsupport@auralex.com or call 1–800–95–WEDGE. For best results, fill out a Personalized Room
Analysis Form (http://www.auralex.com/pcf/) before calling so the application specialist can properly assist you.
Thank you for purchasing Auralex® Total Sound Control® products!
INSTALLATION GUIDE*
1. This box contains 24 AudioTiles. Carefully remove each tile from the box and sort into four separate piles
according to their unique shapes, as shown on Figure 3:
 CAUTION
Before applying adhesive, build the design on the floor
first to get an idea of placement.
2. Apply adhesive (sold separately) to the back of an AudioTile
according to the specific adhesives instructions:
Foamtak(TM) Spray Adhesive
For best results, turn the spray
nozzle counter clockwise until it
stops at the “L”; position.
Tubetak ProT Liquid Adhesive
Requires standard–size caulk gun.
TEMP.TabsT Mounting Kit
TEMP.Tabs are a temporary Studiofoam
mounting solution designed for easy
installation and maximum flexibility.
Requires standard–size caulk gun.
 TIP
Practice spraying on a piece of cardboard
before attempting to spray the AudioTiles.
3. After applying adhesive, place AudioTile in the
appropriate location according to any one of the design
layout templates shown on Figure 4.
TIP
Use any of the design layout templates shown or create your own
one–of–a–kind design.
*Visit Auralex.com to view other exciting AudioTile designs you can build using the same components!
AudioTile(TM) ShockWave(TM) | Design Ideas
Here are just some of the cool designs you can build with this 24 piece set of AudioTileT ShockwaveT.
One 24 piece set effectively
treats up to one 8’ x 10’
wall or ceiling.
Visit Auralex.com for more AudioTile (TM) design ideas and additional Auralex® Total Sound Control® products.
 See all Auralex Products
About Contractor’s A/V.com
Contractor’s A/V.com is a resource for everyone (the public), from those new to technology through the most sophisticated professionals. CAV offers a one–stop resource to understand products and how to use them with a bias only for quality and value. Contractor’s A/V.com was created for this purpose since no other effective resource quite like it exists. Our objective is to help our customers make an informed purchase decision so as to get the most from their technology products and purchases.
Still Have Questions?
Feel free to e–mail us at techhelp@contractorsav.com or call us at (888) 848–4228.
Contractor’s A/V.com – Technology Made Simple™ |
 |