Auralex - Audio Tile Shockwave 224 piece Set
Installation Guidelines
This is information for purchasing pArtScience™ AudioTile™ 24 piece set—the next generation of acoustical treatments from Auralex® Acoustics. Varying thickness built into each patent–pending AudioTile delivers excellent broadband absorption, while the tessellated forms allow a unique means of blending absorption, diffusion, and reflection for optimum acoustical performance.
AudioTile Features Include:
★Maximum Broadband Absorption: Absorption coefficient of 0.81 @ 125 Hz. Maximum NRC = 1.00 to 1.05 depending on installation
★Varying Thickness: Foam thickness varies from 1” to 4” to provide effective absorption at a wide range of frequencies
★Unlimited Tessellation Design Patterns: Allows a unique means of blen
ding absorption, diffusion and reflection
★Easy Installation: Mount using Foamtak™ spray adhesive, Tubetak Pro™ liquid adhesive and/or Temp•Tabs™ Studiofoam® mounting kits
This installation guide includes general recommendations and installation procedures for seven possible designs you can create from this 24 piece box of AudioTile. To see additional design ideas, visit the AudioTile design gallery at Auralex.com. Should you have any questions about the installation of your pArtScience AudioTile System, feel free to contact an Auralex Application Specialist by Contractorsav.com via email at sales@contractorsav.com or call 1–888–848–4228. For best results, fill out a Personalized Room Analysis Form (http://www.auralex.com/pcf/) before calling so the application specialist can properly assist you.
This is information for purchasing Auralex® Total Sound Control® products!
INSTALLATION GUIDE*
1. This box contains 24 AudioTiles. Carefully remove each tile from the box and sort into four separate piles according to their unique shapes, as shown on Figure 3:
 CAUTION
Before applying adhesive, build the design on the floor
first to get an idea of placement.
2. Apply adhesive (sold separately) to the back of an AudioTile according to the specific adhesives instructions:
Foamtak™ Spray Adhesive:
For best results, turn the spray nozzle counter clockwise until it stops at the “L”; position.
Tubetak Pro™ Liquid Adhesive:
Requires standard–size caulk gun.
TEMP•Tabs™ Mounting Kit:
TEMP•Tabs are a temporary Studiofoam mounting solution designed for easy installation and maximum flexibility.
Requires standard–size caulk gun.
 TIP
Practice spraying on a piece of cardboard
before attempting to spray the AudioTiles.
3. After applying adhesive, place AudioTile in the appropriate location according to any one of the design layout templates shown on Figure 4.
TIP
Use any of the design layout templates shown or create your own
one–of–a–kind design.
*Auralex products also have ther exciting AudioTile designs you can build using the same components!
AudioTile™ ShockWave™ | Design Ideas
Here are just some of the cool designs you can build with this 24 piece set of AudioTile™ Shockwave™.
One 24 piece set effectively treats up to one 8’ x 10’ wall or ceiling.
Visit Auralex.com for more AudioTile™ design ideas and additional
Auralex® Total Sound Control® products.
 See all Auralex Products
About Contractor’s A/V.com
Contractor’s A/V.com is a resource for everyone (the public), from those new to technology through the most sophisticated professionals. CAV offers a one–stop resource to understand products and how to use them with a bias only for quality and value. Contractor’s A/V.com was created for this purpose since no other effective resource quite like it exists. Our objective is to help our customers make an informed purchase decision so as to get the most from their technology products and purchases.
Still Have Questions?
Feel free to e–mail us at techhelp@contractorsav.com or call us at (888) 848–4228.
Contractor’s A/V.com – Technology Made Simple™ |
 |