Auralex - Audio Tile Shockwave
Installation Guidelines
This is a Guideline for pArtScience™ AudioTile™, the next generation of acoustical treatments from Auralex®Acoustics. Varying thickness built into each patent–pending AudioTile delivers excellent broadband absorption, while tessellated forms allow a unique means of blending absorption, diffusion, and reflection into custom designs precisely tailored to meet the desired acoustical performance of any room. The result is a room with a pleasing, well–controlled sound without being perceived as too dry.
Audiotile Features Include:
★ Maximum Broadband Absorption: Absorption coefficient of 0.81 @ 125 Hz. Maximum NRC = 1.00 to 1.05 depending on installation
★ Varying Thicknesses: Foam thicknesses from 1” to 4” are built into each pattern providing varying degrees of absorption at varying frequencies.
★Unlimited Tessellation Design Patterns: Allows a unique means of blending absorption,diffusion and reflection.
★Easy Installation: Mount using Foamtak™ spray adhesive, Tubetak Pro™ liquid adhesive and/or Temp•Tabs™ Studiofoam®
mounting kits.
This installation guide includes general recommendations and installation procedures for seven possible designs you can create from this 24 piece box of AudioTile. To see additional design ideas, visit the AudioTile design gallery at Auralex.com. Should you have any questions about the installation of your pArtScience AudioTile System, feel free to contact an Auralex Application Specialist by Contractorsav.com via email at sales@contractorsav.com or call 1–888–848–4228. For best results, fill out a Personalized Room Analysis Form (http://www.auralex.com/pcf/) before calling so the application specialist can properly assist you.
This is information for purchasing Auralex® Total Sound Control® products!
INSTALLATION GUIDE*
1.
There are 96 AudioTiles per box. Sort each AudioTile into four separate piles according to their unique shapes:
2.
Create sub–assemblies by gluing individual A AudioTiles together as shown in the illustrations below:
 TIP:
Practice spraying the Foamtak on a piece of cardboard before attempting to spray the AudioTile(s).
For best results, turn the spray nozzle counter clockwise until it stops at the“L” position.
3.
Glue sub–assemblies to walls.
TIP:
Use a level to ensure the final design installation will be level.
 Click on this link for Auralex Products
About Contractor’s A/V.com
Contractor’s A/V.com is a resource for everyone (the public), from those new to technology through the most sophisticated professionals. CAV offers a one–stop resource to understand products and how to use them with a bias only for quality and value. Contractor’s A/V.com was created for this purpose since no other effective resource quite like it exists. Our objective is to help our customers make an informed purchase decision so as to get the most from their technology products and purchases.
Still Have Questions?
Feel free to e–mail us at techhelp@contractorsav.com or call us at (888) 848–4228.
Contractor’s A/V.com – Technology Made Simple™ |
 |