Product Description
Mackie's M-Series High-Efficiency Stereo Power Amplifiers deliver up to 3000 Watts (for M3000 Model) of the cleanest power available. Their efficient Class-H design gives them amazing horsepower from just a standard 120/240V power outlet. The pinnacle of power amp engineering, the M-Series' exclusive Adaptive Slewing technology and Fast Recovery circuitry with Baker Clamps give them the lowest distortion of any Class-H amp on the market. And with 50% more output components versus the competition, plus over-temperature, low voltage, and DC offset protection circuitry, the M-Series is literally over-designed to perform flawlessly in even the most extreme conditions.
M-3000
Specifications |
|
|
| Continuous
Average Output Power in watts, both channels driven |
| 20 Hz-20 kHz into 8 ohms per channel |
475 |
| 20 Hz-20 kHz into 4 ohms per
channel |
800 |
| 40 Hz-20 kHz into 2 ohms per
channel |
1200 |
| Bridge Mono: 20 Hz-20 kHz into 8 ohms |
1600 |
| Bridge Mono: 40 Hz-20 kHz into
4 ohms |
2400 |
|
| Maximum Output Power in
watts, both channels driven |
|
| 1 kHz @ 1% THD into 8 ohms per channel |
600 |
| 1 kHz @ 1% THD into 4 ohms
per channel |
1000 |
| 1 kHz @ 1% THD into 2 ohms
per channel |
1500 |
| Bridge Mono: 1 kHz @ 1% THD
into 8 ohms |
2000 |
| Bridge Mono: 1 kHz @ 1% THD
into 4 ohms |
3000 |
|
|
Note: Power ratings are specified at 120VAC (U.S. and Canada) and 240VAC (Export) line voltages.
Power Bandwidth (rated power into 4 Ohms):
20 Hz to 20 kHz
(Output power typically -3 dB at 50 kHz.
Amplifier protection circuits
typically mute the output signal above 40 kHz at full power.)
Frequency Response (1 watt into 8 Ohms):
Lower than 10 Hz to 55 kHz (+0, -3 dB)
Distortion:
THD, SMPTE IMD < 0.05% @ 8 Ohms
Less than 0.10% @ 4 Ohms
Less than 0.20% @ 2 Ohms
Signal-to-Noise Ratio:
Greater than 107 dB below rated power into 4 Ohms
Channel Separation:
Greater than 80 dB @ 1 kHz
Damping Factor:
Greater than 500 (8 Ohms @ 400 Hz)
Input Impedance:
24k Ohms balanced
12k Ohms balanced
Input Sensitivity:
1.23 volts (+4 dBu) for rated power into 4 Ohms
Gain:
M.2000 31.4 dB (37.3 V/V)
Maximum Input Level:
9.75 volts (+22 dBu)
Rise Time (8 Ohms):
Less than 6 micro-seconds
Slew Rates:
Voltage Slew Rate: 50V/micro-second
Current Slew Rate: 25A/micro-second at 2Ohms
H-Switch Slew Rate: 10-50V/micro-second (program dependent)
Features & Details
Brand:
Mackie
Model/SKU:
M-3000
MSRP:
$1,099.99
CAV Price:
$856.36
- High Efficiency Class-H Stereo Power Amplifiers deliver more clean power and less destructive heat from a standard 120/240V power outlet
- Adaptive Slewing Technology for incredibly fast transient response with minimal distortion
- Fast Recovery circuitry reduces distortion at the edge of clipping and beyond
- Switchable 150Hz LPF/HPF for instant 2-way loudspeaker systems
- Extensive Protection Circuits for power supply over-temperature protection, low voltage / brownout protection, and fusible resistors throughout
- Low feedback / Low distortion design with triple Darlington output stages.
- True 2-Ohm power drive capability means the M-series can sustain real-world 2-Ohm loads
Warranty Type:
5 Year Limited Manufacturer Warranty
See more detail for this product at the
Mackie website
|
Product box length: |
19.50 in |
|
Product box width: |
19.00 in |
|
Product box height: |
3.50 in |
|
Product box weight: |
48.00 lbs |
|
UPC code:
|
|
*Actual shipping cost will vary depending on packing methods and materials.